Skip to main content

Site Navigation

Your Account

Choose Language

Help

Original post by: Pierre Michael ,

Text:

Hi, you could use a different sensor if you want. The expected input is a value between 0 and 5V that varies with liquid level. If you use pin 1 on the liquid sensor header, you can feed in a different input as long as the behavior is the same or similar. You could then calibrate accordingly in the Liquid Level Tab in the UI (after enabling it in the settings).

Take a look at the schematic. J3 is the header in question.

https://github.com/partyrobotics/bartendro/blob/master/hardware/dispenser/Dispenser.sch

Status:

open