Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Current version by: Christopher Ambler ,

Title:

How do I get HDMI cable in?I suspect my Pi is dead...
How do I get HDMI cable in?I suspect my Pi is dead...

Text:

I have a B7 from the kickstarter. When I turn on power, it flashes multiple colors and then goes all blue and sits there. I let it sit for a good half hour, just to be sure.

The SD card is well-seated. All pumps light up.

I saw in some answers that plugging in HDMI and watching the boot is a good place to start, but the HDMI port is right next to pump ports 9-15, and it butts right against  two of them with about 2mm clearance.

There's simply no way to get an HDMI cable plugged in unless I removed two of the plugs (not really possible, of course).

Am I hosed?

Category:

Bartendro 7

Status:

open

Original post by: Christopher Ambler ,

Title:

How do I get HDMI cable in?

Text:

I have a B7 from the kickstarter. When I turn on power, it flashes multiple colors and then goes all blue and sits there. I let it sit for a good half hour, just to be sure.

The SD card is well-seated. All pumps light up.

I saw in some answers that plugging in HDMI and watching the boot is a good place to start, but the HDMI port is right next to pump ports 9-15, and it butts right against  two of them with about 2mm clearance.

There's simply no way to get an HDMI cable plugged in unless I removed two of the plugs (not really possible, of course).

Am I hosed?

Category:

Bartendro 7

Status:

open