Skip to main content

Site Navigation

Your Account

Choose Language

inputs throught the accessory port

Can the router take inputs through the accessory port from an arduino and cause a drink to be made.

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Do you mean instead of the Raspberry Pi, or in addition?

In addition, it certainly can be, but it couldn't replace the Pi, because there is a lot of higher level logic involved that an 8bit micro couldn't handle well.

You'd have to write some of your own code, but it should be doable.

Was this answer helpful?

Score 0


it would be in In addition


Great. Both Raspberry Pis should be able to communicate with each other over I2C.


So, I'm not trying to talk to another pi I'm trying to talk to the an arduino. I have I2c turned, on the pi, the arduino is hooked up to accessory port 1, and all I have for now is a simple slave read serial print program that I had working with another arduino. I am not only getting nothing from the pi and when the arduino is hooked to the router thought accessory port 1 the bartendro is finicky and dose not want to work right. Problems that happen a inconsistent, and change each time. I have the blue and white wire with the blue strip hooked to the arduino. please let me know what I need to change, and what will be sent across to the arduino.


Add a comment

Add your answer

joe will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 53