If something is wrong with your hardware, see if there's a guide here that can help you out. If you don't see what you need, drop us an email and we'll either write up a guide, or try to point you in the right direction.

10 Questions View all

Options

Cannot Calibrate Liquid Sensors

I cannot seem tu understand liquid level calibration, anybody can help me? Maybe it’s dumb but I just can’t get it, it doesn’t say what are those numbers neither let me change it’s input manually.

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

Hi Marco,

If you go to the admin page, you can find the tab for liquid sensors and calibrate them by putting the tube from the liquid sensor into some liquid, you can read the sensor and see its value. Then you can tell the sensor what to use for the ‘out’ level. It could be very little liquid, or half a bottle, it’s up to you.

Was this answer helpful?

Yes No
Score 0

Comments:

The readings were very odd. Do I need to fill the tube, or just put into the liquid? Does work by pressure or liquid inside the tube? And there are two connectors, which one do I use? I'm feeling dumb but just couldn't make it work.

by

Add a comment

Add your answer

Marco will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 24